Anacom Anasat 20 watt EC Transceiver Extended C-Band

Description

20 WATT  Extended C Band Transceiver.  Power cable not included.
Suitable for SCPC,MCPC,and DAMA applications.
TX OUTPUT 5.85 to 6.425 GHz
RX INPUT F
3.625 to 4.200 GHz
SPECIFICATIONS:
Typical Power consumption 229VA
1 db Gain Compression Point 43 dBm
TX GAIN   74 dB
TX GAIN ADJUSTMENT RANGE +6 to -20 dB M&C controlled
TX LEVEL FLATNESS  ±1.5 dB / 36 MHz
TX GAIN VARIATION ±1.5 dB over frequency and temperature
TX INPUT IF FREQUENCY 52 to 88 MHz
TX INPUT IF IMPEDANCE 50 ohms (75 ohms optional)
TX INPUT IF LEVEL -30 dBm ±10 dB (+20 dBm MAX)
TX FREQUENCY STEP SIZE 1 MHz M&C controlled
TX PHASE NOISE 100 Hz: -60 dBc, 1 KHz: -70 dBc  10KHz -80 dBc, 100 KHz: -90 dBc
TX LINEARITY : -30 dBc (2 carriers @ 9 dB back-off or 6 db composite )
TX INSTANTANEOUS BANDWIDTH  ±18 MHz
RX FREQUENCY STEP SIZE
1 MHz M&C controlled
RX OUTPUT FREQUENCY
52 to 88 MHz
RX INSTANTANEOUS BANDWIDTH
±18 MHz
RX GAIN
85 to 100 dB M&C controlled
RX GAIN VARIATION
±1.5 dB over frequency and temperature
RX NOISE FIGURE
0.9 dB (65K) MAX / Optional 0.4 dB (35K) and 0.63 dB (45K)
RX LINEARITY
-35 dBc intermod,MAX
RX PHASE NOISE
100 Hz: -60 dBc, 1 KHz: -70 dBc 10 KHz: -80 dBc, 100 KHz: -90 dBc
RX OUTPUT IMPEDANCE
50 ohms (75 ohms optional)
PORTS 2
RS-232 or 1 RS-232 and 1 RS-485
Protocol: RS-232 port supports any “dumb terminal” or ASCII interface ;
RS-485 port supports addressed packetized data per ANACOM Supervisor™ software specifications
Alarm Relays
FORM C for MAJOR and MINOR alarms; isolated
Visual Indicators
GREEN LED (flashing) indicates power is active ;RED LED indicates a summary alarm
POWER
100 to 242 VAC; 47 to 63 Hz