AmSteel Daisy Chains ( For climbing Sticks, Treestands, Saddlehunting)

Description

Made from top shelf 7/64 Amsteel
Our daisy chains make attaching climbing sticks to the tree painless and quiet. They have a tensile strength of 1600lbs with a working load of 320lbs. With no metal involved makes it much quieter to climb up a tree and less room for packing. The two end loops are 2 inches and each loop sequence is 2.5 inches. There is 3 ft of consecutive loops and one long tail that is another 3ft totaling 6ft in length
This product can be used for climbing sticks, platforms, a gear hanger, you could even drag a deer out of the woods with one.
** always check your equipment before using in the field
** daisy chains are not meant to be left outside, they are to be stored away after every hunt.
** Always use a linesman rope when using a Daisy chain.
** Always focus on 3 points of contact when climbing up and down a tree.
**It is the user’s responsibility to use rope in a safe manner.
**It is recommended to retire and replace ropes every 2 years.